Polyether Amine Series
4026
4026 Polyether Amine Curing Agent
Low-viscosity, non-blushing polyether amine curing agent. Fast surface dry, colourless and free of K-54 accelerator.
Floors · Adhesives
View →
7055
7055 Waterborne Modified Fatty Amine Epoxy Curing Agent
7055 is a waterborne modified fatty amine epoxy curing agent designed to pair with epoxy emulsions and liquid epoxy resins. It emulsifies epoxy outstandingly well, keeps viscosity low, and is especially suited to polymer cement composite mortars such as ECC (Engineered Cementitious Composites).
Waterborne SeriesECC · WaterborneRoom-temperature cure20 / 200 kg drums
Product overview
Engineered for its duty
7055 brings epoxy performance into waterborne, cement-compatible systems. Added to epoxy emulsion or directly to liquid resin, it forms stable waterborne blends that mix cleanly into cementitious mortars — producing ECC with measurably better compressive and flexural strength than unmodified mixes.
As a genuinely waterborne product it is non-hazardous for transport, low in odour and easy to clean up, opening epoxy-grade performance to applications where solvent-borne systems are impractical: occupied buildings, infrastructure repairs and green-building projects.
Key benefits
Why formulators specify it
- Superior epoxy emulsification
Forms stable, homogeneous waterborne blends. - Ambient-temperature cure
No heated curing equipment required. - Low viscosity, good flow
Pumps and mixes easily into mortar systems. - Strong ECC mechanicals
Improves compressive and flexural strength of polymer cement composites. - Non-hazardous waterborne product
Low odour, easy cleanup, simple transport and storage.
Applications
Where it is used
- ECC — Engineered Cementitious Composites
- Polymer cement composite mortars
- Waterborne epoxy coatings and sealers
- Concrete repair and strengthening systems
Technical data
Typical properties
| Appearance | Amber to light brown emulsifiable liquid |
|---|---|
| Solids content | Approx. 35 – 45% |
| Viscosity (25 °C) | ≤ 2,000 mPa·s |
| pH (as supplied) | Approx. 9 – 11 |
| Dosage (with epoxy emulsion) | Approx. 25 – 35 parts per 100 parts emulsion solids |
| Cure | Ambient cure; minimum 15 °C for best film formation |
Values shown are typical, determined under standard laboratory conditions, and are provided for guidance only. They do not constitute a specification. Please test a small sample against your resin system and application conditions before bulk use. The most current Technical Data Sheet is available on request via our contact form.
Handling & safety
Application and storage
Application
For well-cured films, apply at temperatures above 15 °C and relative humidity below 80%, with free air circulation at the work site.
Avoid applying thick single coats; build films in multiple passes. Protect materials from freezing during storage and transport — store and move under frost-safe conditions.
Storage
Store sealed in a dry place away from ignition sources at 5 – 40 °C. Shelf life: 12 months. Protect from frost.
Packaging
25 L or 200 L plastic drums.
Safety
Non-hazardous waterborne product. Still avoid eye contact and prolonged skin exposure; rinse with water after contact.
Related products
Often specified together
Explore complementary curing agents from the Henster range, or browse all products →
Polyether Amine Series
Adhesive Series
HT-101
HT-101 Structural Adhesive Curing Agent
Low-viscosity blended amine with moderate cure time and outstanding mechanical properties — engineered for carbon-fiber and steel-plate bonding adhesives.
CFRP · Steel bonding
View →
Fatty Amine Series
HB-5008
HB-5008 Fatty Amine Curing Agent
Solvent-free, low-viscosity fatty amine curing agent with outstanding moisture tolerance, good mechanical properties and non-yellowing films.
Self-levelling floors
View →
Work with Henster
Let’s match the right curing agent to your formulation.
Send us your resin system, application and performance targets — we reply with technical recommendations, TDS documents and sample arrangements within one business day.