Polyether Amine Series
4026
4026 Polyether Amine Curing Agent
Low-viscosity, non-blushing polyether amine curing agent. Fast surface dry, colourless and free of K-54 accelerator.
Floors · Adhesives
View →
2215
2215 Modified Cycloaliphatic Amine Epoxy Curing Agent
2215 is a modified cycloaliphatic amine curing agent with a light colour and long working time. Cured films offer excellent water, acid and alkali resistance, outstanding toughness and impact resistance, no amine blush and a durable high-gloss finish.
Cycloaliphatic SeriesDecorative · CraftsRoom-temperature cure20 / 200 kg drums
Product overview
Engineered for its duty
2215 is the choice for applications where appearance and open time are critical: decorative floors, resin jewellery and craft casting, stone bonding and clear electronic potting. Its cycloaliphatic structure cures to water-clear, UV-stable films that keep their gloss and do not blush even under humid conditions.
The extended pot life gives applicators time to place detailed work — castings, encapsulated electronics, artwork and terrazzo-style floors — while still curing firmly at room temperature within a practical schedule.
Key benefits
Why formulators specify it
- Light colour, water-clear cure
Ideal for decorative, clear and tinted systems. - Long pot life
Comfortable working time for detailed placement. - Excellent water, acid & alkali resistance
Suitable for wet and chemically exposed environments. - Tough and impact resistant
Films resist chipping and mechanical shock. - Non-blushing, high gloss
Stable, attractive surfaces without post-blush.
Applications
Where it is used
- Epoxy floor screeds and decorative top coats
- Stone casting and bonding
- Adhesives, resin jewellery and craft adhesives
- Electronic potting compounds
Technical data
Typical properties
| Appearance | Colourless to pale yellow transparent liquid |
|---|---|
| Viscosity (25 °C) | Approx. 100 – 300 mPa·s |
| Amine value | Approx. 320 – 380 mg KOH/g |
| Mix ratio (phr, EEW ≈ 190) | 45 – 55 parts per 100 parts resin |
| Pot life (100 g batch, 25 °C) | Approx. 60 – 120 minutes |
| Full cure | 7 days at 25 °C |
| Cured film appearance | Water-clear, high gloss, no blush |
Values shown are typical, determined under standard laboratory conditions, and are provided for guidance only. They do not constitute a specification. Please test a small sample against your resin system and application conditions before bulk use. The most current Technical Data Sheet is available on request via our contact form.
Handling & safety
Application and storage
Application
Apply at 5 – 35 °C and relative humidity below 85%. For castings above 5 mm, pour in layers to control exotherm.
Pre-test a small sample against your resin batch and project conditions before full-scale use.
Storage
Store sealed in the original container in a cool, dry, well-ventilated area away from ignition sources. Shelf life: 12 months.
Packaging
20 kg and 200 kg net steel drums.
Safety
Amine products may cause skin sensitisation. Avoid skin and eye contact; wash exposed areas immediately with plenty of water.
Related products
Often specified together
Explore complementary curing agents from the Henster range, or browse all products →
Polyether Amine Series
Adhesive Series
901
901 Tile Grout Adhesive Curing Agent
Cycloaliphatic curing agent with a long open time, fast final cure and high-gloss, stain-resistant joints. Built for epoxy tile grout systems.
Grout · Sealants
View →
Aromatic Amine Series
HS-113
HS-113 Aromatic Amine Curing Agent
Fast-curing modified aromatic amine for floor screeds, mid & base coats and electronic potting. High Tg, hard and impact-resistant films.
Floors · Potting
View →
Work with Henster
Let’s match the right curing agent to your formulation.
Send us your resin system, application and performance targets — we reply with technical recommendations, TDS documents and sample arrangements within one business day.